BSA Chrome Round Lever Petrol Tap 1/4" x 1/4" With Filter Made in England

Chrome Tap Set  1/4" Gas Thread into the Tank 1/4" Gas Thread Outlet Excellent Quality Made in UK

BSA Brass Round Lever Petrol Tap 1/4" x 1/4" With Filter Made in England

Brass Tap Set  1/4" Gas Thread into the Tank 1/4" Gas Thread Matching Nut & Spigot Excellent Quality Made in UK

Self-Generating Internal Rotor Kit For BSA A65, B25, B40, B50, C15, Triumph 3TA, 5TA, T120, T140

Ignition only self generating CDI ignition with electronic advance, specifically developed for Triumph twins allowing easy starting and maximum performance. Period of electronic advance 27°. Replaces the original Lucas alternator - points and distributor are not required. For easy starting a spark is generated at 300rpm. Operates within the engine oil. Manufactured in the UK.

Ignition only Stator Kit For BSA B25, B40, B44, B50, C15, C12T Made in England

Self generating, ignition only high performance system for single cylinder engines. Ideal for Trials and MX. Electronic advance curve specifically developed for BSA singles allowing easy starting and maximum performance. Easy installation. Fully compatible for operation within the engine oil. Commonly fitted for race applications where the low inertia flywheel allows for rapid engine acceleration. Manufactured in the UK.

Classic Motorcycle Triumph, BSA Classic Motorcycle Transfer 'Minimum Oil Level'

Triumph, BSA High Quality Classic Motorcycle Minimum Oil Level Transfer Minimum Oil Level Transfer Suitable For All Classic Motorcycles with Oil Tanks Excellent Quality Made in UK Sold in Singles

BSA Pillion Footrests (Pair) for Classic Motorcycle Complete With Rubbers Long Pin

BSA / Universal Pillion Footrests Complete With Rubbers High Quality Sold in Pairs

BSA Pillion Footrests (Pair) for Classic Motorcycle Complete With Rubbers Long Pin

BSA / Universal Pillion Footrests Complete With Rubbers High Quality Sold in Pairs

BSA Universal Wide Trails Seat Aluminium Base Tapped Fixings

Universal Narrow Wide Trails Seat High Quality Black   Three threaded holes for fastening the seat

Genuine Hepolite BSA Bantam Inner Crank Engine Bearing for D1, D3, D5,D7,D10, D14

BSA Bantam Inner Crank Engine Bearing  For D1, D3, D5,D7,D10, D14 Genuine Hepolite  Sold in Singles (Normally 2 are Required For Bantam Engines) Made in England    

BSA Brass Round Lever Petrol Tap Nut & Spigot Set 1/4" x 1/4" Made in UK With Filter

Brass Tap Set  1/4" Gas Thread into the Tank 1/4" Gas Thread Matching Nut & Spigot Comes With Brass Mesh Filter Excellent Quality Made in UK

BSA Classic Motorcycle Conical Air Filter Soft Foam 39mm Clamp on Type

Clamp on Conical Foam Air Filter Suitable For Classic Bike Clamp on Excellent Quality UK Supplied

BSA Six-way Spoke Spanner Fits 6 Sizes of Spoke Nipple

Spoke Spanner Fits 6 Sizes of Spoke Nipple Excellent Quality UK Supplied

BSA Universal Piston Ring Compressor Ring Suits 70-75mm (2.76-2.96") Cylinder Size

Piston compressor ring  Suits 70mm - 75mm (2.76" - 2.96")piston rings Excellent Quality Sold in singles

BSA DBD 34 Goldstar / Universal Silencer with Straight Inlet & Slotted Bracket & Reducer Kit

BSA Goldstar Silencer / Universal Large Bore inlet & outlet 1 3/4" Can be fitted with the adaptors supplied for smaller down pipes Excellent quality & Chrome Finish Also fits modern Royal Enfields

BSA External Oil Filter Set, Lines, Clips, Filter, Housing & Rubber Hose

Classic motor cycle external oil filter set Complete with filter housing, hose protective springs Pile Clips x 4 Rubber hose 1m Made in UK

BSA Classic Bike Front Number Plate Fixing Studs Finished in Chrome Sold as a Pair

Front number plate fixing brackets Finished in chrome Excellent quality Sold as a pair

Silencer BSA Clubman Goldstar DBD32/34 1 3/4" Inlet Size OEM 42-2896

BSA Silencer Chrome High Quality Sold in Singles Also fits modern Royal Enfield Models

BSA Union Jack Enamel Pin Badge For Classic Motorcycle

High Quality Pin Badge Union Jack Pin Badge Enamel Finish Made in UK

BSA Universal Narrow Trails Seat Aluminium Base Tapped Fixings & Bolts Supplied

Universal Narrow Trails Seat High Quality Made in UK Black   Three threaded holes for fastening the seat including fixing bolts Suitable for BSA Bantam's & Cubs Trial bikes

Classic Motorcycle Triumph, BSA, Norton Screw on Pick Up OEM No 463066

Screw on HT Pick Up Lucas K1F, K2F & K2FC Magnetos Fits Left & Right Hand Applications